目的：
原始流往網際網路的WEB流量經過防火牆Netscreen-25重新導向內部的Squid proxy伺服器並提供掃毒需求.

方法：
透通式SQUID可以省去客戶端設定的麻煩, 但需將 TCP 80 流量重新導向. Netscreen 支援兩種導向方式, 介紹如下

• NAT-DST(DNAT)
  NETSCREEN NAT-DST的限制如下(來源：ScreenOS參考指南)
  「注意 : 原始目的地IP位址及已轉譯的目的地IP位址必須在相同的安全區內」
  由於向外WEB流量在untrust (any), 因此SQUID伺服器也必須在DMZ或有MIP, 且必須允許untrust介面IP流向SQUID位址DMZ/MIP TCP:3128流量. 另外內部流量向untrust的TCP:80封包必須DNAT到SQUID伺服器MIP位址的TCP:3128. 該方式會造成統計SQUID流量時看到的都是防火牆作NAT介面的外部IP, 無法統計實際流量. 原本想把SQUID 內部IP加進untrust-vr, 然後DNAT到內部IP 也是不可行. 此方式可以在舊版ScreenOS(5.4之前)使用.
• PBR(Policy Base Routing. Screenos 5.4.0以上支援)
  此方法可以直接將特定服務流量到向指定的IP但是不支援PAT, 也就是可以轉寄流量但是不能更改目的埠, 因此需要搭配在SQUID主機上執行IPTABLES以達成目的埠轉換..

考量流量分析精確性, Server安全性及架構, 這裡採用PBR以達到cache目的

1. CentOS5主機安裝Squid 3.1
   上http://rpm.pbone.net搜尋下載squid3-3.1.8-1.el5.pp.i386.rpm
   [root@centos5]# rpm –Uvh squid3-3.1.8-1.el5.pp.i386.rpm
   修改 /etc/squid/squid.conf (只列出重點設定)

   #上層伺服器
   cache_peer proxy.hinet.net parent 80 0 no-query no-digest no-netdb-exchange

   #將連到youtube.com要求轉發給上層伺服器
   cache_peer_domain proxy.hinet.net .youtube.com

   #預設存取設定
   acl manager proto cache_object
   acl localhost src 127.0.0.1/32 ::1
   acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
   acl localnet src 10.0.0.0/8     # RFC1918 possible internal network
   acl localnet src 172.16.0.0/12  # RFC1918 possible internal network
   acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
   acl localnet src fc00::/7       # RFC 4193 local private network range
   acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

   # ACL for Youtube
   acl youtube dstdomain .youtube.com

   acl SSL_ports port 443
   acl Safe_ports port 80          # http
   acl Safe_ports port 21          # ftp
   acl Safe_ports port 443         # https
   acl Safe_ports port 70          # gopher
   acl Safe_ports port 210         # wais
   acl Safe_ports port 1025-65535  # unregistered ports
   acl Safe_ports port 280         # http-mgmt
   acl Safe_ports port 488         # gss-http
   acl Safe_ports port 591         # filemaker
   acl Safe_ports port 777         # multiling http
   acl CONNECT method CONNECT

   # 讓Youtube 使用上層, 其餘由squid本身直接存取
   never_direct allow youtube
   http_access allow manager localhost
   http_access deny manager
   http_access deny !Safe_ports
   http_access deny CONNECT !SSL_ports
   http_access allow localnet
   http_access allow localhost

   # ssl代理
   ssl_bump deny localhost
   ssl_bump allow all
   http_access deny all

   # 透通代理http
   http_port 3128 intercept

   # 透通代理https.基本上不建議在透通模式下啟用.必須置換憑證以解密ssl流量, 因此需要正式憑證, 若使用測試憑證client端會跳出此網站不安全的訊息
   https_port 3129 intercept ssl-bump cert=/etc/pki/tls/certs/testcert.pem

   hierarchy_stoplist cgi-bin ?

   # 將儲存區上限改為1gb.
   cache_dir ufs /var/cache/squid 1000 16 256
   coredump_dir /var/cache/squid
   refresh_pattern ^ftp:           1440    20%     10080
   refresh_pattern ^gopher:        1440    0%      1440
   refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
   refresh_pattern .               0       20%     4320

   #ICAP設定
   icap_enable on
   icap_preview_enable on
   icap_preview_size 128
   icap_send_client_ip on
   icap_service service_avi_req reqmod_precache 0 icap://localhost:1344/srv_clamav
   icap_service service_avi respmod_precache 1 icap://localhost:1344/srv_clamav
   adaptation_access service_avi_req allow all
   adaptation_access service_avi allow all

   #將錯誤顯示頁面設為中文
   error_default_language zh-tw

   設定開機即啟用服務

   [root@centos5]# chkconfig –add –level 2345 squid

2. 設定iptables
   加入規則

   [root@centos5]# iptables -A PREROUTING -i eth0 -p tcp -m tcp -m multiport tcp -d 10.0.0.2 –dport 80,443 -j ACCEPT
   [root@centos5]# iptables -A PREROUTING -i eth0 -p tcp -m tcp ! -d localhost –dport 80 -j REDIRECT –to-port 3128
   [root@centos5]# iptables -A PREROUTING -i eth0 -p tcp -m tcp ! -d localhost –dport 443 -j REDIRECT –to-port 3129

   Squid伺服器本身有提供Web服務, 因此第一行需放行目的為本機IP的TCP 80,443封包, 第二行將連往網際網路TCP 80的封包重新導向Squid服務的TCP 3128. 第三行則將連往網際網路TCP 443的封包重新導向Squid服務的TCP 3129.
   啟動並儲存規則

   [root@centos5]# service iptables start
   [root@centos5]# iptables-save > /etc/sysconfig/iptables
   [root@centos5]# chkconfig –add –level 2345 iptables

3. 設定NetScreen
   PBR流程
   3-1. 建立兩個acl存取名單. 第一組為來源IP是區域網路封包目標為網際網路網頁存取.第二組則為Squid伺服器本身的網際網路存取, 避免本身連向網路封包變成迴圈. CLI (指令模式)

   set access-list extended 1 src-ip 10.0.0.0/24 dst-port 80-80 protocol tcp entry 1
   set access-list extended 1 src-ip 10.0.0.0/24 dst-port 443-443 protocol tcp entry 2
   set access-list extended 2 src-ip 10.0.0.2/32 dst-port 80-80 protocol tcp entry 1
   set access-list extended 2 src-ip 10.0.0.2/32 dst-port 443-443 protocol tcp entry 2

   3-2. 第一組acl加入Http_Traffic群組(match-group), 第二組acl則加入Direct_Http_Traffic群組(match-group). CLI (指令模式)

   set match-group name Direct_Http_Traffic
   set match-group Direct_Http_Traffic ext-acl 2 match-entry 1
   set match-group name Http_Traffic
   set match-group Http_Traffic ext-acl 1 match-entry 1

   3-3. Tproxy的執行動作設定為當符合Http_Traffic群組的封包到達時直接送往Squid伺服器(10.0.0.2). Direct_Http則將符合Direct_Http_Traffic群組送往untrust介面(eth3). CLI (指令模式)

   set action-group name Tproxy
   set action-group Tproxy next-hop 10.0.0.2 action-entry 1
   set action-group name Direct_Http
   set action-group Direct_Http next-interface ethernet3 action-entry 1

   3-4. 建立政策(policy). 第一個先讓Squid本機連往網際網路, 若為其他客戶端則為順序2, 轉到Squid主機..

   set pbr policy name trust_policy
   set pbr policy trust_policy match-group Direct_Http_Traffic action-group Direct_Http 1
   set pbr policy trust_policy match-group Http_Traffic action-group Tproxy 2
   set pbr trust_policy
   exit

   3-5. 將政策連結到trust介面(eth1).CLI (指令模式)

   set interface ethernet1 pbr trust_policy

4. 安裝Clamav
   #搭配MailScanner 因此安裝 Clamd

   [root@centos5]# yum install clamav clamav-db clamd

5. 安裝c-icap
   上http://rpm.pbone.net搜尋下載c-icap , c-icap-modules的source rpm回來編譯

   [root@centos5]# rpmbuild –rebuild c-icap-0.1.1-1.el5.pp.src.rpm

   編譯完成後會有多個檔案主要安裝下面幾個
   c-icap-0.1.1-1.el5.pp.i386.rpm      # c-icap主程式
   c-icap-libs-0.1.1-1.el5.pp.i386.rpm   # library
   c-icap-progs-0.1.1-1.el5.pp.i386.rpm  # client程式
   c-icap-devel-0.1.1-1.el5.pp.i386.rpm  # 編譯c-icap-modules用
   下載的c-icap-modules並無開啟clamv, 需自行修改並編譯

   [root@centos5]# rpmbuild -i c-icap-modules-0.1.1-1.el5.pp.src.rpm
   [root@centos5]# cd /usr/src/redhat/SPECS

   更改c-icap-modules.spec檔案, 註釋掉」–without-clamav」

   CFLAGS=”${RPM_OPT_FLAGS} -fno-strict-aliasing” \
   –enable-shared                                \
   –with-bdb
   #       –without-clamav  # Still not in RedHat/CentOS

   重編

   [root@centos5]# rpmbuild -bb c-icap-modules-0.1.1-1.el5.pp.src.rpm
   [root@centos5]# cd ../RPMS/i386
   [root@centos5]# rpm –Uvh c-icap-modules-0.1.1-1.el5.rpm

   修改c-icap server設定 /etc/c-icap/c-icap.conf

   PidFile /var/run/c-icap/c-icap.pid
   CommandsSocket /var/run/c-icap/c-icap.ctl
   Timeout 300
   MaxKeepAliveRequests 100
   KeepAliveTimeout 600
   StartServers 3
   MaxServers 10
   MinSpareThreads     10
   MaxSpareThreads     20
   ThreadsPerChild     10
   MaxRequestsPerChild  0
   Port 1344
   ServerAdmin 你的管理員郵件
   ServerName 你的主機名稱
   TmpDir /var/tmp
   MaxMemObject 131072
   DebugLevel 1
   ModulesDir /usr/lib/c_icap
   ServicesDir /usr/lib/c_icap
   TemplateDir /usr/share/c_icap/templates/
   TemplateDefaultLanguage en
   LoadMagicFile /etc/c-icap/c-icap.magic
   RemoteProxyUsers off
   RemoteProxyUserHeader X-Authenticated-User
   RemoteProxyUserHeaderEncoded on
   #本機存取位址
   acl localhost src 127.0.0.1/255.255.255.255
   #所有位置
   acl all src 0.0.0.0/0.0.0.0
   #允許本機存取
   icap_access allow localhost
   #拒絕所有存取
   icap_access deny all
   #Log檔位置
   ServerLog /var/log/c-icap/server.log
   AccessLog /var/log/c-icap/access.log
   #以下三行設定病毒紀錄檔格式及位置
   acl VIRUS icap_resp_header{X-Infection-Found} /Type=.*/
   LogFormat viruslog “%tl, %>a %im %iu %is %{X-Infection-Found}<ih:”
   AccessLog /var/log/c-icap/viruses.log viruslog VIRUS
   Service echo srv_echo.so
   #開啟clamav模組掃瞄功能
   Include srv_clamav.conf

   修改c-icap-modules設定, 基本上維持預設值即可

   Service antivirus_module srv_clamav.so
   ServiceAlias  avscan srv_clamav?allow204=on&sizelimit=off&mode=simple
   srv_clamav.ScanFileTypes TEXT DATA EXECUTABLE ARCHIVE GIF JPEG MSOFFICE
   srv_clamav.SendPercentData 5
   srv_clamav.StartSendPercentDataAfter 2M
   srv_clamav.MaxObjectSize  5M
   srv_clamav.ClamAvTmpDir /var/tmp
   srv_clamav.ClamAvMaxFilesInArchive 0
   srv_clamav.ClamAvMaxFileSizeInArchive 100M
   srv_clamav.ClamAvMaxRecLevel 5

   此rpm所提供的init script以c-icap身份啟動, 經測試無法正常啟動.改以root啟動卻無問題, 因此修改/etc/sysconfig/c-icap

   #改掉下面這行, 將使用者改為root
   #RUN_AS=”c-icap”
   RUN_AS=”root”

   也可以到官網http://c-icap.sourceforge.net 下載最新0.1.2版自行安裝, 但原始package並未包含init script/syconfig/logrotate檔.
   設定開機啟動

   [root@centos5]# chkconfig –add –level 2345 c-icap

6. 啟動相關服務

   [root@centos5]# service c-icap start

   [root@centos5]# service squid start

7. 測試掃毒功能

   [root@centos5]# c-icap-client -f /path_to_clamav/test/clam.exe -s “srv_clamav?allow204=on&force=on&sizelimit=off&mode=simple”
   ICAP server:localhost, ip:127.0.0.1, port:1344
   <html>
   <head>
   <!–C-ICAP/0.1.2 srvClamAV module –>
   </head>
   <body>
   <H1>VIRUS FOUND</H1> You try to upload/download a file that contain the virus<br>
   ClamAV-Test-File
   <p>This message generated by C-ICAP/0.1.2 srvClamAV/antivirus module
   <!– And this is a silly HTML comment just to make this error bigger than 512 bytes
   is allowed to be displayed in IE. Yes, IE has a “feature” which does not allow
   error messages smaller than 512 bytes to be displayed, because they are not considered
   “friendly” enough.
   (Hmm…I think this stupid comment is better than embedding viruses or porn images in this error message like a bad guy suggested me!)–> </body>

   顯示掃到毒(clamav原始package內附的樣本)

8. 結論：大致上需要的功能皆已完成, Squid部份可以進行校調以增加cache命中率.

〈Netscreen + Squid (Transparent) + c-icap + ClamAV〉這篇文章最早發佈於《MIS 的流水年華》。

Objects > Services > Custom > New: 輸入下面的內容，然後按一下 OK:
Service Name: PCAnywhere
No 1:
Transport protocol: TCP
Source Port Low: 0
Source Port High: 65535
Destination Port Low: 5631
Destination Port High: 5631
No 2:
Transport protocol: UDP
Source Port Low: 0
Source Port High: 65535
Destination Port Low: 5632
Destination Port High: 5632

Network > Interfaces > Edit ( 對於 Untrust) > VIP > New VIP Service
Virtual IP: 外部IP
Virtual Port: 5631(對於多連接埠服務，輸入服務的最低連接埠號碼作為虛擬連接埠號碼)
Map to Service: PcAnywhere(5631)

按下OK離開，接下來要設定規則
Policies > (From: Untrust, To: Trust) New: 輸入下面的內容，然後按一下 OK:
Source Address:
Address Book Entry: ( 選擇), Any
Destination Address:
Address Book Entry: ( 選擇), VIP(外部IP)
Service: PCAnywhere
Action: Permit

若要啟用 VIP 以支援多連接埠服務，必須輸入 CLI 指令set vip multi-port，儲存組態，然後將裝置重新開機。

開啟命令提示字元
> telnet xxx.xxx.xxx.xxx(Netscreen IP)
> login: your account
> password: your password
> nx5xp2-> set vip multi-port
> nx5xp2-> exit

重開防火牆，完成

〈Netscreen VIP 設定〉這篇文章最早發佈於《MIS 的流水年華》。